技术交流QQ群:①185473046   ②190706903   ③203744115   网站地图
登录

下次自动登录
现在的位置: 首页LAMP>正文
CentOS 6.3安装配置LAMP服务器(Apache+PHP5+MySQL)
2012年07月22日 LAMP 评论数 5 ⁄ 被围观 21,367次+

准备篇:

1、配置防火墙,开启80端口、3306端口
   vi /etc/sysconfig/iptables
   -A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT   #允许80端口通过防火墙
   -A INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT   #允许3306端口通过防火墙

备注:很多网友把这两条规则添加到防火墙配置的最后一行,导致防火墙启动失败,

正确的应该是添加到默认的22端口这条规则的下面

如下所示:

系统运维 www.osyunwei.com 温馨提醒:qihang01原创内容版权所有,转载请注明出处及原文链接
########################################################
# Firewall configuration written by system-config-firewall
# Manual customization of this file is not recommended.
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
-A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A INPUT -p icmp -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT
-A INPUT -j REJECT --reject-with icmp-host-prohibited
-A FORWARD -j REJECT --reject-with icmp-host-prohibited
COMMIT
########################################################

/etc/init.d/iptables restart  #重启防火墙使配置生效

2、关闭SELINUX
   vi /etc/selinux/config
   #SELINUX=enforcing       #注释掉
   #SELINUXTYPE=targeted    #注释掉
   SELINUX=disabled         #增加
   :wq!   #保存退出  
   shutdown -r now  #重启系统

安装篇:

一、安装Apache
      yum install httpd    #根据提示,输入Y安装即可成功安装 
      /etc/init.d/httpd start #启动Apache
     
备注:Apache启动之后会提示错误:
      正在启动 httpd:httpd: Could not reliably determine the server's fully qualif domain name, using ::1 for ServerName     
      解决办法:
      vi /etc/httpd/conf/httpd.conf   #编辑
      找到  #ServerName www.example.com:80
      修改为 ServerName www.osyunwei.com:80  #这里设置为你自己的域名,如果没有域名,可以设置为localhost
      :wq!    #保存退出
      chkconfig httpd on   #设为开机启动
      /etc/init.d/httpd restart  #重启Apache

二、安装MySQL

1、安装MySQL
      yum install mysql mysql-server  #询问是否要安装,输入Y即可自动安装,直到安装完成
      /etc/init.d/mysqld start   #启动MySQL
      chkconfig mysqld on   #设为开机启动
      cp /usr/share/mysql/my-medium.cnf   /etc/my.cnf  #拷贝配置文件(注意:如果/etc目录下面默认有一个my.cnf,直接覆盖即可)

2、为root账户设置密码
      mysql_secure_installation
      回车,根据提示输入Y
      输入2次密码,回车
      根据提示一路输入Y
      最后出现:Thanks for using MySQL!
      MySql密码设置完成,重新启动 MySQL:
      /etc/init.d/mysqld restart #重启
      /etc/init.d/mysqld stop   #停止
      /etc/init.d/mysqld start  #启动

三、安装PHP5

1、安装PHP5

系统运维 www.osyunwei.com 温馨提醒:qihang01原创内容版权所有,转载请注明出处及原文链接
       yum install php  #根据提示输入Y直到安装完成  

2、安装PHP组件,使 PHP5 支持 MySQL
      yum install php-mysql php-gd libjpeg* php-imap php-ldap php-odbc php-pear php-xml php-xmlrpc php-mbstring php-mcrypt php-bcmath php-mhash libmcrypt   #这里选择以上安装包进行安装,根据提示输入Y回车
      /etc/init.d/mysqld restart  #重启MySql
      /etc/init.d/httpd restart  #重启Apche

配置篇

一、Apache配置
   vi /etc/httpd/conf/httpd.conf  #编辑文件
   ServerTokens OS     #在44行  修改为:ServerTokens Prod (在出现错误页的时候不显示服务器操作系统的名称)
   ServerSignature On  #在536行 修改为:ServerSignature Off (在错误页中不显示Apache的版本)
   Options Indexes FollowSymLinks  #在331行 修改为:Options Includes ExecCGI FollowSymLinks(允许服务器执行CGI及SSI,禁止列出目录)
   #AddHandler cgi-script .cgi #在796行 修改为:AddHandler cgi-script .cgi .pl (允许扩展名为.pl的CGI脚本运行)
   AllowOverride None  #在338行 修改为:AllowOverride All (允许.htaccess)
   AddDefaultCharset UTF-8 #在759行 修改为:AddDefaultCharset GB2312 (添加GB2312为默认编码)
  Options Indexes MultiViews FollowSymLinks  #在554行 修改为 Options MultiViews FollowSymLinks(不在浏览器上显示树状目录结构)
   DirectoryIndex index.html index.html.var  #在402行 修改为:DirectoryIndex index.html index.htm Default.html Default.htm index.php Default.php index.html.var  (设置默认首页文件,增加index.php)
   KeepAlive Off   #在76行 修改为:KeepAlive On (允许程序性联机)
   MaxKeepAliveRequests 100   #在83行 修改为:MaxKeepAliveRequests 1000 (增加同时连接数) 
   :wq!  #保存退出
   /etc/init.d/httpd restart #重启
  
系统运维 www.osyunwei.com 温馨提醒:qihang01原创内容版权所有,转载请注明出处及原文链接
   rm -f /etc/httpd/conf.d/welcome.conf /var/www/error/noindex.html    #删除默认测试页

二、php配置
vi  /etc/php.ini   #编辑
  date.timezone = PRC     #在946行 把前面的分号去掉,改为date.timezone = PRC
  disable_functions = passthru,exec,system,chroot,scandir,chgrp,chown,shell_exec,proc_open,proc_get_status,ini_alter,ini_alter,ini_restore,dl,openlog,syslog,readlink,symlink,popepassthru,stream_socket_server,escapeshellcmd,dll,popen,disk_free_space,checkdnsrr,checkdnsrr,getservbyname,getservbyport,disk_total_space,posix_ctermid,posix_get_last_error,posix_getcwd, posix_getegid,posix_geteuid,posix_getgid, posix_getgrgid,posix_getgrnam,posix_getgroups,posix_getlogin,posix_getpgid,posix_getpgrp,posix_getpid, posix_getppid,posix_getpwnam,posix_getpwuid, posix_getrlimit, posix_getsid,posix_getuid,posix_isatty, posix_kill,posix_mkfifo,posix_setegid,posix_seteuid,posix_setgid, posix_setpgid,posix_setsid,posix_setuid,posix_strerror,posix_times,posix_ttyname,posix_uname
#在386行 列出PHP可以禁用的函数,如果某些程序需要用到这个函数,可以删除,取消禁用。
  expose_php = Off        #在432行 禁止显示php版本的信息
  magic_quotes_gpc = On   #在745行 打开magic_quotes_gpc来防止SQL注入
  short_open_tag = ON     #在229行支持php短标签
  open_basedir = .:/tmp/  #在380行 设置表示允许访问当前目录(即PHP脚本文件所在之目录)和/tmp/目录,可以防止php木马跨站,如果改了之后安装程序有问题,可以注销此行,或者直接写上程序的目录/data/www.osyunwei.com/:/tmp/
:wq!  #保存退出
/etc/init.d/mysqld restart  #重启MySql
/etc/init.d/httpd restart   #重启Apche

测试篇
cd  /var/www/html
vi index.php   #编辑输入下面内容
<?php
phpinfo();
?>
:wq!  #保存退出
在客户端浏览器输入服务器IP地址,可以看到相关的配置信息!
系统运维 www.osyunwei.com 温馨提醒:qihang01原创内容版权所有,转载请注明出处及原文链接

注意:apache默认的程序目录是/var/www/html
权限设置:chown apache.apache -R /var/www/html
至此,CentOS 6.3安装配置LAMP服务器(Apache+PHP5+MySQL)完成

     

  系统运维技术交流QQ群:①185473046 系统运维技术交流□Ⅰ ②190706903 系统运维技术交流™Ⅱ ③203744115 系统运维技术交流™Ⅲ

目前有 5 条留言 其中:访客:5 条, 博主:0 条

  1. 影子 : 2012年08月23日17:49:10  1楼

    我对比了一下 http://www.osyunwei.com/archives/1566.html
    CentOS 6.2安装配置LAMP服务器(Apache+PHP5+MySQL)
    发现就2处区别:
    1、 这篇文章多了“short_open_tag = ON #在229行支持php短标签”这一设置
    2、这篇文章没有“MySQL数据库目录是:/var/lib/mysql
    权限设置:chown mysql.mysql -R /var/lib/mysql” 这一设置

    请哪位帮忙解释一下那个chown命令如果不写会有什么不良后果吗?先行谢过!

  2. watch : 2012年11月05日22:09:42  2楼

    如何控制安装的php版本为php5.2.X呢?php5.3的版本太高 :cry:

  3. bingodeng : 2012年11月14日11:04:41  3楼

    你好,想请教下,我的是centos 6.2 64bit,执行过yum -y update,之后系统以升级到6.3,我按你上面的步骤安装好之后,我的index.php.并不显示,cat /var/log/httpd/error_log提示[Tue Nov 13 21:52:19 2012] [error] [client 192.168.1.5] File does not exist: /var/www/html/favicon.ico,我是系统是选择mini安装的。

  4. 411152544 : 2012年12月03日22:25:27  4楼

    学习了,上培训班一天环境没搭出来,今天晚上学习这个教程,终于完成了。
    革命尚未成功,自己还需努力啊!
    谢谢群主了!

给我留言

您必须 [ 登录 ] 才能发表留言!



Copyright© 2011-2024 系统运维 All rights reserved
版权声明:本站所有文章均为作者原创内容,如需转载,请注明出处及原文链接
陕ICP备11001040号-3